H&K G36 EBB Carbine Replica
A G36 carbine replica bearing markings of the manufacturer of the live firearm original - Heckler&Koch. Identically to the live firearm original, the replica was made mainly of light and durable polymer. Metal was used in the manufacture of barrel panels, the barrel as well as small elements such as pins, the trigger, the stock latch and the fire mode selector.
The replica has three RIS / Picatinny 22 mm rails. The first, top rail enables the attachment of any optics. It also includes a set of flip-up iron sights. Other two rails have been placed on top and in the bottom of barrel panels. On the sides, there are openings of the KeyMod system that enables the attachment of additional rails.
The replica has an IDZ stock with five-position setting adjustment and an adjustable cheek pad. The stock can also be folded to the right side.
The heart of the replica consists of a metal gearbox V3 equipped with steel gears, which allows the replica to fire BBs with a muzzle velocity of ~330 FPS. In addition, the carbine features an Electric Blow Back System that sets the mock bolt carrier into motion when firing. The gearbox also features an EFCS module that controls the trigger mechanism allowing for smooth operation and shortens the motor’s reaction time to a squeeze of a trigger. A standard connector cube was replaced with an electronic system. EFCS has a built-in MOSFET module.
The carbine features a characteristic for H&K constructions 45-degree fire mode selector. The replica enables firing in three modes: automatic, two-round bursts and semi-auto.
The replica comes with a Low-Cap magazine that can hold up to 45 BBs.
The set does not include a battery or a charger.
The set includes:
- replica
- magazine
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | Yes |
| Product weight [g] | 3135 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 310 |
| Fire mode | 2-shot series Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
| Inner barrel length [mm]. | 540 |